Wholesale OEM/ODM Horizontal Universal Bench Lathe Chine Engine Lathe (KY1440C)

Short Description:

The lathe bed is of an integral floor type structure. It is integrally cast. After casting and rough machining, it is subject to aging treatment to ensure the structural rigidity of the whole machine. The guide way surface is subject to medium frequency quenching, the hardness is not less than HRC52, the hardening depth is not less than 3mm, and the stability of the whole machine is good.

The reasonable structure design ensures that the lathe has sufficient static and dynamic rigidity. The advanced technology ensures that the machine has good quality, low noise and small vibration.

Beautiful appearance, combined with ergonomic principles, easy adjustment of workpieces, easy operation and maintenance.

The main parts such as the bed, headstock, carriage and tailstock are made of high-quality resin sand castings. After natural aging and artificial aging, the main parts of the machine are guaranteed to have low deformation and high stability.

The spindle adopts a three support structure, with reasonable span, low noise, low heat generation and good accuracy retention.

The spindle has a wide speed range, stable operation, low temperature rise and good accuracy retention.

The main transmission gear is hardened and ground to ensure its high accuracy, smooth operation and low noise.

High cutting power and high processing efficiency.

Send email to us

Product Detail

Product Tags

Our pursuit and company intention is usually to “Always fulfill our purchaser requirements”. We go on to acquire and layout excellent high quality products for both our previous and new consumers and realize a win-win prospect for our customers too as us for Wholesale OEM/ODM Horizontal Universal Bench Lathe Chine Engine Lathe (KY1440C), We fully welcome clients from all around the planet to determine stable and mutually beneficial small business interactions, to have a vivid long term together.
Our pursuit and company intention is usually to “Always fulfill our purchaser requirements”. We go on to acquire and layout excellent high quality products for both our previous and new consumers and realize a win-win prospect for our customers too as us for China Metal Lathe and Bench Lathe Machine, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which might be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we’ll continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

Use and characteristics

This machine tool is a universal general-purpose lathe, which is suitable for turning outer circle, end face, grooving, cutting, boring, turning inner cone hole, turning thread and other processes of shaft parts, cylindrical and plate parts of different materials with high-speed steel and hard alloy steel tools. The machine body has high rigidity, and the apron, tool post and saddle can move quickly. This lathe has the characteristics of strong rigidity, high efficiency, safety and reliability, easy operation and beautiful appearance.

main parameters

	Model
specification	CW6163E CW6263E			CW6180E CW6280E	CW61100E CW62100E			CW61120E CW62120E
capacity
Swing diameter over bed	630mm (25″)			800mm (32”)	1000mm (39.4″)				1200mm (47.2”)
Swing diameter over cross slide	350mm (13.8″)			485mm (19”)	685mm (27″)				800mm (31.5”)
Swing diameter over gap	830mm(32.7″,CW6263E)			1000mm(39.4″,CW6280E)	1200mm(47.2″,CW62100E)				1400mm(55″,CW62120E)
Distance between centers	750mm, 1250mm, 1750mm, 2750mm, 3750mm
Valid length of gap	230mm (8″)
Width of bed	550mmmm (21.7”)
headstock
Spindle nose	D11 or C11
Spindle bore	105mm (4.1″) or 130mm (5.1”, optional for CW6180E-CW61200E)
Taper of spindle bore	1:12, Φ120mm (Φ140mm optional for CW6180E-CW61200E)
Range of spindle speed (Number)	18 changes 14-750r/min
Gear box-threads and Feed
Rapid travel: longitudinal/cross	4000mm/2000mm/min
Lead screw size:Diameter/pitch	T48mm/12mm or T55mm/12mm (above 5000mm length lathe)
Longitudinal feeds range	72 kinds 0.048-24.3mm/rev (0.0019″-09567″/rev)
Cross feeds range	72 kinds 0.024-12.15mm/rev (0.00098″-0.4783″/rev)
Metric thread range	54 kinds 1-240mm
Inch thread range	36 kinds 28-1 inch
Diameter thread range	27 kinds 30-1T.P.I.
Modular thread range	27 kinds 0.5-60D.P.
carriage
Cross slide travel	350mm	420mm				520mm		620mm
Compound rest travel	200mm
Size of tool shank	32x32mm
Tailstock
Quill diameter	100mm (3.94”)
Quill travel	240mm (9.45”)
Quill taper	MT No.6
Motor
Main motor power	7.5kW(15HP)3PH
Coolant pump power	0.09KW, 3PH
Rapid travel motor power	1.1KW
Dimension and weight
Overall dimension (LxWxH)
Center distance (1500mm)	3452x1326x1390mm CW6180E
Net weight	4300KG		4500KG		5000KG		5500KG

Our pursuit and company intention is usually to “Always fulfill our purchaser requirements”. We go on to acquire and layout excellent high quality products for both our previous and new consumers and realize a win-win prospect for our customers too as us for Wholesale OEM/ODM Horizontal Universal Bench Lathe Chine Engine Lathe (KY1440C), We fully welcome clients from all around the planet to determine stable and mutually beneficial small business interactions, to have a vivid long term together.
Wholesale OEM/ODM China Metal Lathe and Bench Lathe Machine, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which might be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we’ll continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

Previous: Wholesale OEM Horizontal Heavy Duty Bench Equipment Price Torno CNC Lathe

Next: 2019 China New Design High Efficient Deep Hole Drilling Machine 400mm Drill Earth Auger Max. Drilling Depth 80/54 M General Direct Sales

China Metal Lathe and Bench Lathe Machine