Protection device of machine rotation parts
The pull and push device is installed on the Machine rotation part (such as chuck and Motor) to prevent the fall off of workpiece Due to centrifugal force, and ensure the machine and operator’s safety. This design meets with safety standard of machine design.
Center design of sliding platec srew+flat
guide way design+dovetail rail positioning dual axis of machine are all driven by high precision ground ball screw which are all central design to avoid the pulling deviation during transmisioin process and guarantee the machining accuracy. Guide way are do Vetail type as sliding positioning while the Flat guide way as sliding support to ensure. The positioning accuracy and stability of Sliding plate.
Bus termination operation system
The machine CNC system adopts bus termination operation system and high advanced CNC control systems like GSK, SIEMENS, FANUC, etc with manual pulse Generator to realize convenient operation with stable signal transmission and high
Accuracy.
High accuracy headstock
40Cr forged and ground gears are used in the headstock with 4 gear shifts speed regulation. All shafts are spline structure with tight fit. The standard configuration of bearings are Harbin, Wa and Luo brands with high accuracy. The gear meshes with high accuracy and low noise.
CNC end face turning lathe, through the automatic control of CNC system (FANUC/SIEMENS/GSK/KND, etc), can be used for turning various kinds of inner hole, outer circle, conical surface, circular arc surface and thread.
Overall size drawing
Model | CK64125 | CK64160 | CK64200 | CK64250 | CK64300 |
Swing diameter over bed | Φ1250mm | Φ1400mm | Φ2000mm | Φ2500mm | Φ3000mm |
Swing diameter over carriage | Φ800mm | Φ1250mm | Φ1600mm | Φ2000mm | Φ2500mm |
Guide way width of machine bed | 850mm | 1000mm | 1250mm | 1250mm | 1250mm |
Chuck diameter | Φ1000mm | Φ1250mm | Φ1600mm | Φ2000mm | Φ2500mm |
Length of chuck jaw seat | Embedded chuck jaws | Embedded chuck jaws | 400mm | 500mm | 800mm |
Workpiece loading weight | 2000kg | 3000kg | 4000kg | 5000kg | 5000kg |
Spindle speed gears | 3 gear shifts | 3 gear shifts | 3 gear shifts | 3 gear shifts | 3 gear shifts |
Spindle speed | 6-210rpm stepless | 4-140rpm stepless | 4-106rpm stepless | 3-87rpm stepless | 3-87rpm stepless |
X axis rapid travel speed | 3000mm/min | 3000mm/min | 3000mm/min | 3000mm/min | 3000mm/min |
Z axis rapid travel speed | 3000mm/min | 3000mm/min | 3000mm/min | 3000mm/min | 3000mm/min |
Electric turret size | 280mmx280mm | 280mmx280mm | 300mmx300mm | 300mmx300mm | 300mmx300mm |