Q13 series pipe threading lathe, oil field & hollow spindle lathe

Short Description:

*Big spindle bore and double chuck allows clamp and process big diameter pipes. *Integral machine bed adopts high strength iron casting to realize high rigidity and precision. *Ultrasonic frequecncy quenched guide ways are hard enough for good wear-resistance. *Equipped with taper guide bar device, this enables the machine to process taper threads.

Send email to us

Product Detail

Product Tags

Features

*Big spindle bore and double chuck allows clamp and process big diameter pipes.
*Integral machine bed adopts high strength iron casting to realize high rigidity and precision.
*Ultrasonic frequecncy quenched guide ways are hard enough for good wear-resistance.
*Equipped with taper guide bar device, this enables the machine to process taper threads.

LATHE INTRODUCTION

Q13 series pipe threading lathe mainly used for turning the internal and external threads, including metric and inch thread, as well as having all the common functions of normal engine lathe such as processing the inner bore, end face of shafts and discs, equipped with taper guide bar device, it can process taper thread, this series is widely used in industries including petroleum exploiting, minerals mining, chemical piping and geological prospecting, for processing and repairing drilling pipe, drilling rod, thread coupling and son on.

	specification	unit	Q1313	Q1319C	Q1322C	Q1325C	Q1327C
capacity	Swing over bed	mm	630/800	630/800	630/800	800	800
	Swing over cross slide	mm	340/520	340/520	340/520	480	480
	Distance between centers	mm	1500/3000	1500/3000	1500/3000	1500/3000	1500/3000
	Pipe threading range	mm	30-126	50-193	50-220	50-250	50-270
Spindle	Guide way width	mm	550	550	550	600	600
	Max. load capacity	T	3	3	3	4	4
	Spindle bore	mm	130	206	225	255	280
	Spindle speed steps		FWD,18 steps.REV. 9 steps	VF, 4 steps
	Spindle speed range	rpm	30-650	20-550		20-420
	Chuck	mm	Φ400, manual 3-jaw chuck	Φ520/manual 4 jaw chuck		Φ630/manual 4 jaw chuck
Turret	Turret/ tool post		Manual 4 position
Turret	Tool shank size	mm	30x30	32x32	32x32	32x32	32x32
Feed	X axis travel	mm	320/420	320/420	320/420	420	420
	Z axis travel	mm	1350/2850	1350/2850	1350/2850	1250/2750	1250/2750
	X axis feed grade/range	mm/r	22/0.02-0.45	22/0.02-0.45	22/0.02-0.45	22/0.02-0.45	22/0.02-0.45
	Z axis feed grade/range	mm/r	26/0.07-1.33	26/0.07-1.33	26/0.07-1.33	26/0.07-1.33	26/0.07-1.33
	X axis rapid travel	mm/min	2300	2300	2300	2300	2300
	Z axis rapid travel	mm/min	4000	4000	4000	4000	4000
	Metric thread grade/range	mm	52/1-24	1-15	1-15	1-15	1-15
	Inch thread grade/range	T.P.I	40/28-2	14-1	14-1	14-1	14-1
Tailstock	Tailstock quill diameter	mm	Φ100	Φ100	Φ100	Φ120	Φ120
	Tailstock quill taper	/	MT5	MT5	MT5	MT6	MT6
	Tailstock quill travel	mm	250	250	250	250	250
motor	Mian spindle motor	KW	11	11	11	15	15
	Rapid travel motor	KW	0.3	0.3	0.3	1.1	1.1
	Coolant pump motor	KW	0.125	0.125	0.125	0.125	0.125
Dimension	Width x height	mm	1500x1500	1500x1550	1650x1550	1700x1600	1700x1600
Dimension	length	mm	3700/5200	3700/5200	3700/5200	4100/5600	4100/5600
weight	Net weight	T	4.0/5.2	4.3/5.5	4.5/5.7	8.0/9.0	8.0/9.0
Note: machine bed length can customize according to real work demand.

	specification	unit	Q1327	Q1332	Q1338	Q1343	Q1350
capacity	Swing over bed	mm	1000	1000	1000	1000	1200
	Swing over cross slide	mm	610	610	610	610	710
	Distance between centers	mm	1500/3000	1500/3000	1500/3000	1500/3000	1500/3000
	Pipe threading range	mm	130-270	190-320	190-320	270-430	330-510
Spindle	Guide way width	mm	755	755	755	755	765
	Max. load capacity	T	6	6	6	6	6
	Spindle bore	mm	280	330	390	440	520
	Spindle speed steps		FWD,12 steps.	FWD,9 steps	FWD,9 steps	FWD,9 steps	FWD,9 steps
	Spindle speed range	rpm	16-380	7.5-280	6-205	4.9-180	4.9-180
	Chuck	mm	Φ800, manual 4-jaw chuck	Φ780/electrical4 jaw chuck	Φ850/electrical4 jaw chuck	Φ100/electrical4 jaw chuck	Φ1000/electrical4 jaw chuck
Turret	Turret/ tool post		Manual 4position
Turret	Tool shank size	mm	45x45	45x45	45x45	45x45	45x45
Feed	X axis travel	mm	520	520	520	520	520
	Z axis travel	mm	1350/2850	1350/2850	1350/2850	1350/2850	1350/2850
	X axis feed grade/range	mm/r	40/0.05-1.5	32/0.05-0.75	32/0.05-0.75	32/0.05-0.75	32/0.05-0.75
	Z axis feed grade/range	mm/r	40/0.1-3	32/0.1-1.5	32/0.1-1.5	32/0.1-1.5	32/0.1-1.5
	X axis rapid travel	mm/min	1870	1870	1870	1870	1870
	Z axis rapid travel	mm/min	3740	3740	3740	3740	3740
	Metric thread grade/range	mm	30/1-30	23/1-15	23/1-15	23/1-15	23/1-15
	Inch thread grade/range	T.P.I	27/28-1	22/28-2	22/28-2	22/28-2	22/28-2
Tailstock	Tailstock quill diameter	mm	Φ160	Φ160	Φ160	Φ160	Φ160
	Tailstock quill taper	/	MT6	MT6	MT6	MT6	MT6
	Tailstock quill travel	mm	300	300	300	300	300
motor	Mian spindle motor	KW	22	22	22	22	22
	Rapid travel motor	KW	1.5	1.5	1.5	1.5	1.5
	Coolant pump motor	KW	0.125	0.125	0.125	0.125	0.125
Dimension	Width x height	mm	2100x1600	2100x1650	2100x1700	2100x1700	2100x1700
Dimension	length	mm	4800/6300	4900/6400	4900/6400	5000/6500	4900/6400
weight	Net weight	T	10.0/11.5	11.5/13	12.8/14.3	13.0/14.5	15.0/16.5
Note: machine bed length can customize according to real work demand.