OEM Manufacturer Automatic Cylinder Boring Machine - TMK2280 Deep Hole Cylinder Boring And Honing Compound Machine – Premach

Short Description:

Send email to us

Product Detail

Product Tags

Feedback (2)

Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of Large Cnc Lathe , Boring In Drilling Machine , Gun Drilling Equipment , Our ultimate goal is to rank as a top brand and to lead as a pioneer in our field. We are sure our successful experience in tool production will win customer's trust, Wish to co-operate and co-create a better future with you!

OEM Manufacturer Automatic Cylinder Boring Machine - TMK2280 Deep Hole Cylinder Boring And Honing Compound Machine – Premach Detail:

Function Description

2.1 Boring
By means of push boring, the cutting oil enters the inner hole of the tool tube from the end of it, and then reaches the cutting edge.
One end of the workpiece is supported by a manual four jaw chuck, the other end is supported by a steady rest, and the middle of the workpiece is supported by a support jack.
The chip removal device is placed at the left and right ends of the workpiece to send the chip into the chip receiving tank, and the cutting oil directly returns to the boring oil tank.
The ball screw installed on the bed is used to drive the cutting tool to move in Z direction.
When boring, the feeding saddle and the vibration damper steady move on the casting guide way.

2.2 Honing
vibration damper steady of boring move to the rightmost end of the machine, loosen the boring tube by these vibration damper steady and fix the boring tube on the larger vibration damper steady, now the boring tube become honing tube and larger vibration damper steady become the feeding saddle of honing; install the vibration damper steady of honing tube on the machine; install the hydraulic expansion and contraction device of honing head on the left end of the honing tube, and then install the honing head. The connection of the honing head is universal connection.
Remove the chip box on the oil tank, and put the honing recycle oil tank directly under the chip removal device, so that the honing oil can be sent to the honing oil tank through the pump on the recycle oil tank for recycling.
In honing, the servo motor drives the rack and pinion mechanism to realize the movement of feeding saddle of honing on the linear guide way.

TMK2280-4
TMK2280-6
TMK2280-7

Technical parameter

Boring/honing diameter range	Φ100～Φ800mm
Max. Machining depth	4000mm
Workpiece length range	1000mm-4000mm
Center height (from flat guide way to spindle center	700mm
Width of casting guide way	800mm
Clamping diameter range of steady rest	Φ500～Φ1000mm
Main motor of headstock	45KW (servo spindle motor)
Spindle speed of headstock	12～300r/min （manual 3 gears, spepless speed between gears）
Taper hole of front end of spindle	140#
Feed speed range of feeding saddle of boring	5～1000mm/min （stepless speed）
Rapid travel speed of feeding saddle of boring	2500mm/min
Feed speed range of feeding saddle of honing	5000mm～8000mm/min （stepless speed）
Rapid travel speed of feeding saddle of honing	15000mm-20000mm/min
Servo motor of driving feed of boring tool	7.5KW
Servo motor of driving feed of honing tool	5.5KW
Motor of cooling pump	5.5 kw ×3 groups
Rated pressure of cooling system	0.5MPa
Flow of cooling system	200, 500, 800L/min
Volume of oil tank	5000L
Size of machine (LxW)	16m×3.5m
Weight of machine	Approx. 28 tons
Max. Workpiece loading weight	12 tons
General power of machine(approximate)	80KW
Four jaw chuck	φ1000

Machning Accuracy

Boring
Aperture accuracy IT8-9
Surface roughness: Ra3.2μm
Straightness:0.1/1000mm.

Honing
Aperture accuracy IT7-8
Surface roughness:Ra0.8-1.6μm
Cylindricity:0.09mm/total length
Roundness:0.05mm/total length

Standard Accessories

One set of steady rest, two sets of support jacks, two sets of vibration damper steadys, one set of 1000mm four jaw chuck, one set of boring coolant system and one set of honing coolant system.

Optional Accessories

Cutting tools: boring head, honing head, boring/honing tube and relative bushes, cutting oil and trepanning function.

Note: Due to continuous improvement and development, the design and specification change without notice.

Product detail pictures:

Related Product Guide:

Good quality comes initial; company is foremost; small business is cooperation is our business philosophy which is frequently observed and pursued by our business for OEM Manufacturer Automatic Cylinder Boring Machine - TMK2280 Deep Hole Cylinder Boring And Honing Compound Machine – Premach , The product will supply to all over the world, such as: South Africa, Denmark, Croatia, All the imported machines effectively control and guarantee the machining precision for the items. Besides, we have a group of high-quality management personnels and professionals, who make the high-quality items and have the ability to develop new merchandise to expand our market home and abroad. We sincerely expect customers come for a blooming business for both of us.

Boring Machine Head