Welcome to our websites!

Best-Selling Metal Fabrication with CNC Machining for Machine Base Weldment or Chassis Part

Short Description:

TCS2150 is special used for machining deep hole of the cylinder, it can drill, bore and roll all kinds of holes of hydraulic cylinders and spindles of the machine.

Metal chips removing method adopt BTA method while drilling, it means that the metal chips will be removed to the receiver in the end of the machine through inside of the drilling rod. And the metal chips removing method adopt forward removing method while boring, boring method is push boring.


Product Detail

Product Tags

The key to our success is “Good Solution Top quality, Reasonable Value and Efficient Service” for Best-Selling Metal Fabrication with CNC Machining for Machine Base Weldment or Chassis Part, We warmly welcome you to definitely build cooperation and produce a bright long run along with us.
The key to our success is “Good Solution Top quality, Reasonable Value and Efficient Service” for China Weldment and Machine Base, Our company regards “reasonable prices, high quality,efficient production time and good after-sales service” as our tenet. We hope to cooperate with more customers for mutual development and benefits in future. Welcome to contact us.

Function Description

The machine is installed with work headstock and travel head with rotating drilling/boring rod, both workpiece and tool can rotate, and the cutting tool can also be fixed, only feed.

In addition, this machine is also installed a toolpost like that of the lathe, so that the machine adds the function of turning outer circle on the basis of deep hole drilling and boring machine. The machine is a series of products, and can also provide various modified products according to customer requirements.

The machine consists of bed, work headstock, lantern of chuck, open steady rest, stead rest, oil pressure head, vibration damper steady of boring rod, travel head with rotating drilling/boring rod, coolant system, electric system, hydraulic system, chip removing device, lubrication system, turning tool post etc.

the four jaw chuck is installed on the work headstock while drilling, and while boring, two taper plates are used, one is installed on the front end of the spindle on the work headstock, another is installed on the oil pressure head, the taper plates are much more convenient for self-centering, in general condition, the degree of the taper plates is 15°, the detailed requirement of the taper plates is determined by the size of the workpiece. The customer can also choose the other clamp method. There is a taper plate in front of the oil pressure head (oil supply device), and there is a guide bush inside of the taper plates, which is used for guide drilling/boring head, this guide bush must be changed when the cutting tool is to be changed.

Technical parameter

Working Capacity

Range of drilling Dia. Φ40-Φ120mm
Max. boring Dia. Φ500mm
Max. boring depth 1-16m
Max. turning outer Dia. Φ600mm
Workpiece clamped Dia. range Φ100-Φ660mm

Spindle

Center height from spindle center to bed 630mm
Spindle bore Dia. Φ120mm
Taper of spindle bore Φ140mm, 1:20
Range of spindle speed 16-270rpm, 12 kinds

Travel head with rotating drilling bar

Spindle bore Dia. of travel head with rotating drilling bar Φ100mm
Taper of spindle bore (travel head with rotating drilling bar) Φ120mm, 1:20
Range of spindle speed (travel head with rotating drilling bar) 82-490rpm, 6 kinds

Feed

Feed speed range (infinite) 0.5-450mm/min
Rapid travel speed of carriage 2m/min

Motors

Main motor power 45KW
Motor power of travel head with rotating drilling bar 30KW
Motor power of hydraulic pump 1.5KW, n=1440rpm
Rapid travel motor power of carriage 5.5KW
Feed motor power 7.5KW (servo motor)
Motor power of cooling pump 5.5KWx3 + 7.5KWx1 (4 groups)
Motor of Z axis 4KW
Motor of X axis 23N.m (stepless)

Others

Rated pressure of cooling system 2.5MPa
Flow of cooling system 100,200,300,600L/min

The key to our success is “Good Solution Top quality, Reasonable Value and Efficient Service” for Best-Selling Metal Fabrication with CNC Machining for Machine Base Weldment or Chassis Part, We warmly welcome you to definitely build cooperation and produce a bright long run along with us.
Best-Selling China Weldment and Machine Base, Our company regards “reasonable prices, high quality,efficient production time and good after-sales service” as our tenet. We hope to cooperate with more customers for mutual development and benefits in future. Welcome to contact us.


  • Previous:
  • Next:

  • Write your message here and send it to us